Miscellaneous

Operating principle of evo
DIALux evo is divided up into a simple mode and tool concept. In each mode you will find typical tools for working with each.
Tue, 7 Mar, 2017 at 3:34 PM
Explanation of terms / Legend
Workspaces By workspaces DIALux evo means a programme setting which supports the designer in his current tasks with an adapted user interface.. DIALux off...
Wed, 8 Mar, 2017 at 12:05 PM
Can several instances of DIALux evo be started at the same time?
It is possible to have several instances of DIALux evo open at the same time and thus work on different projects. N.B: There may be problems when exchangin...
Tue, 7 Mar, 2017 at 3:37 PM
Handling of absolute photometry data in EULUMDAT files
Summary SSL luminaires already have a sizeable market share. In future this will even grow. Unfortunately the SSL technology often does not enabl...
Tue, 31 May, 2016 at 9:09 AM
Declaration of conformity in accordance with ISO/IEC 17050-1
Konformitätserklärung nach ISO/IEC 17050-1 Declaration of conformity in accordance with ISO/IEC 17050-1     Hiermit erklären wir Hereby we ...
Tue, 31 May, 2016 at 9:58 AM
R-Tables in DIALux
For an exact calculation of light intensity ratios it is necessary to know about the reflection ratios of the tarmacs.  Until now light calculation ...
Tue, 31 May, 2016 at 11:24 AM
UGR method - Unified Glare Rating
Further information can be found in attached PDF. Please have also a look at the following article on our DIAL website: No glare from art...
Fri, 3 Jun, 2016 at 8:49 AM
What to consider when comparing DIALux4 and evo?
To compare calculation results between DIALux4 and evo it is important to consider following points: 1. Is the same geometry used? Is for example a room...
Wed, 8 Jun, 2016 at 2:27 PM
Why is the background area according to EN12464 on the ground?
DIALux evo automatically sets the visual task area and the surrounding area to a height of 0.8m when creating task areas according to EN12464. The backgroun...
Wed, 4 Jan, 2017 at 1:19 PM
Keyboard shortcuts
F1 = help F2 = coordinates system on/off F3 = help lines on/off F4 = user planes/areas on/off F5 = wire mesh view on/off F6 = isolines on/off F7 = DWG on/of...
Wed, 8 Mar, 2017 at 3:38 PM